Xiaomi APN Settings for Elisa Finland

Xiaomi APN Settings for Elisa Finland (2026 Guide)

📌 Quick Answer – Correct Elisa APN for Xiaomi:

  • APN: internet
  • Username & Password: Leave blank
  • Authentication Type: Leave default
  • APN Type: default,supl
  • APN Protocol: IPv4/IPv6
  • MCC/MNC: Leave these values at the defaults provided automatically by your SIM/network.
  • Older Saunalahti SIM: If your SIM serial number starts with 00000, use internet.saunalahti instead.

Do not change these settings unless your mobile data is not working.

If mobile data is not working on your Xiaomi, Redmi, or POCO phone with an Elisa Finland SIM, the first APN to check is internet. Most users should not need to enter the APN manually because Elisa normally provides the configuration automatically. This guide shows the standard settings and what to do if the automatic configuration is missing or not working.

Quick Navigation

Before You Change APN

Before manually changing APN settings, check if APN is likely the issue:

  • If your data is already working: Do not change APN settings.
  • If the phone shows 4G/5G signal but no data: Check data balance, account status, and network provisioning first. If those are fine, the APN may be incorrect or missing.
  • If the APN is missing or incorrect: Manual configuration may be needed.

Standard Elisa Finland APN Settings

The following settings are the standard APN configuration for Elisa Finland on Xiaomi devices, based on official Elisa documentation.

Mobile Data APN Configuration

  • Name: Elisa Internet (or any name you prefer)
  • APN: internet
  • Username: (leave blank)
  • Password: (leave blank)
  • Authentication Type: Leave at the default value unless Elisa specifies otherwise
  • APN Type: default,supl
  • APN Protocol: IPv4/IPv6
  • MCC/MNC: Leave these fields at the values automatically provided by the SIM/network.

Note: Some sources include ia in the APN type (default,ia,supl). If default,supl does not work, you can try default,ia,supl.

Step 1: Access APN Settings on Xiaomi

To configure APN settings on your Xiaomi, Redmi, or POCO device, follow these steps:

  • Open Settings on your phone.
  • Go to SIM cards & mobile networks.
  • Tap your Elisa SIM card.
  • Select Access Point Names (APN).

Step 2: Configure or Reset APN

Option A: Reset to Default (Recommended First Step)

If you see a list of APNs, tap the menu icon (three dots) and select Reset to default. This clears any corrupted settings and restores Elisa's automatic configuration.

Option B: Manually Add or Edit APN (Only if Reset Fails)

If resetting does not work, you can manually add a new APN:

  1. Tap the + (Add) icon.
  2. Enter the settings from the table above.
  3. Tap Save and select the new APN.
  4. Restart your phone.

Important: Only change the APN if resetting to default doesn't work. Leave other fields as provided by your device.

Older Saunalahti SIM Cards

If your SIM card is an older Saunalahti SIM (serial number starts with 00000), the APN should be internet.saunalahti instead of internet.

Elisa and Saunalahti SIM cards with serial numbers starting with 1 use internet.

Special APN: Public IP (internet4)

Do not replace the standard internet APN with internet4 unless Elisa has enabled the Public IP service for your eligible subscription.

internet4 is used only if:

  • You have activated Elisa's Public IP service for a mobile broadband subscription.
  • You need a public (dynamic) IP address for specific applications (e.g., port forwarding, hosting services).

This is not available for Elisa Prepaid, Tablet, or phone subscriptions.

MMS Settings (Optional)

If you are having issues sending or receiving picture messages, you may need to configure the MMS settings separately. Most modern devices handle this automatically.

MMS Configuration

  • APN: mms
  • MMSC: http://mms.elisa.fi
  • MMS Proxy: 213.161.41.57
  • MMS Port: 80
  • APN Type: mms
  • Authentication Type: Leave default
  • APN Protocol: IPv4/IPv6

Troubleshooting & Notes

Check Mobile Data and SIM Selection

Make sure mobile data is enabled and that the Elisa SIM is selected for mobile data if you are using dual SIMs.

Reset APN Before Creating Another One

If you created several APNs while troubleshooting, remove the unnecessary custom entries or use Reset to default and test the automatically configured Elisa profile first.

5G and APN

Elisa uses the same APN internet for 4G and 5G connections. If 4G works but 5G does not, the problem is usually not the APN itself. Check whether your subscription, coverage area, device model, and preferred network mode support Elisa 5G.

After System Updates

After a major system update, check whether the Elisa APN profile is still present before manually creating a new one. If the APN was changed or removed, resetting the APN to the carrier defaults can restore the automatic configuration.

Frequently Asked Questions

What is the correct APN for Elisa Finland in 2026?

The standard APN for Elisa Finland is internet with no username or password. For older Saunalahti SIM cards, use internet.saunalahti.

Should I change my Elisa APN if mobile data is already working?

No. If mobile data is working normally, there is usually no reason to change the APN. Manual APN changes are mainly useful when the automatic configuration is missing, incorrect, or not working.

Does Elisa use a username and password for APN?

No. Elisa APN settings typically do not require a username or password. Leave both fields blank.

Why is my mobile data not working after setting APN?

Restart your phone after saving changes. If it still doesn't work, check your plan includes data, or contact Elisa to verify your SIM provisioning.

What is the difference between internet and internet4?

internet4 is used only if you have activated Elisa's Public IP service for a mobile broadband subscription. It provides a public (dynamic) IP address.

What APN does Elisa use for MMS?

Elisa uses APN mms with MMSC http://mms.elisa.fi and MMS proxy 213.161.41.57:80.

Do Xiaomi, Redmi, and POCO phones use different Elisa APN settings?

The APN itself is generally determined by the Elisa network and subscription rather than by whether the phone is branded Xiaomi, Redmi, or POCO. Menu names and available APN fields can vary between models and HyperOS or MIUI versions.

Note: This guide is updated for 2026. Menu names may vary slightly between HyperOS and MIUI versions. If you are using an MVNO, check your specific provider's APN settings.

Comments

Post a Comment

Popular Guides at UK Xiaomi

Xiaomi USB-C Earphones Not Working Issue Fix

Xiaomi USB-C Earphones Not Working Issue Fix – UK Guide If your USB-C earphones are not being recognized or have no sound when plugged into your Xiaomi, Redmi, or POCO device, this guide covers the most common reasons and how to fix them. Quick Answer: If your USB-C earphones aren't working, first check that the earphones work on another device. Then clean the USB-C port gently with a soft brush to remove dust or debris. Restart your phone and plug the earphones in again. If still not working, check USB audio routing in Developer Options (if available on your device). Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS that use a USB-C port for audio, including devices without a 3.5mm headphone jack. 🔍 Quick Diagnostic Table What you see What it usually means Earphones not detected at all Port debris, ...
Read more

Xiaomi Audio Problems on HyperOS Devices Explained

Xiaomi Audio Problems on HyperOS Devices Explained – UK Guide HyperOS audio problems can affect the phone speaker, wired headphones, USB-C earphones, Bluetooth devices, microphones and car audio systems. Although many issues look similar, they usually have different causes. This guide helps you identify the symptom first, then directs you to the appropriate troubleshooting guide. Quick Answer: Most HyperOS audio issues are caused by incorrect volume settings, Bluetooth routing, Dolby Atmos, Bluetooth codec selection, equalizer settings, microphone permissions or hardware faults. Use the diagnostic table below to identify the correct troubleshooting guide. Start Here – Find Your Problem No sound at all → Go to Speaker & Headphone Audio Problems Bluetooth connected but silent → Go to Bluetooth Connected But No Sound Speaker too quiet → Go to Speaker Volume Low Bluetooth audio sounds poor → Go t...
Read more

Xiaomi Wired Earphones Not Detected on Xiaomi Phones

Xiaomi Wired Earphones Not Detected on Xiaomi Phones – UK Fix If your wired earphones are not being detected when plugged into your Xiaomi, Redmi, or POCO device, this guide covers the most common reasons and how to fix them. Quick Answer: If your wired earphones are not detected, first check they are fully inserted. For 3.5mm models, ensure the plug is firmly seated in the headphone jack. For USB-C models, check compatibility – most modern Xiaomi phones work with digital USB-C earphones with a built-in DAC, but analog models may not be supported. Test the earphones on another device, clean the port gently with a soft brush, and restart your phone. Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, covering both 3.5mm headphone jack and USB-C audio connections. USB Audio Architecture – A Quick Overview Understanding the basics of USB audio can help diagnose ...
Read more

Xiaomi Cannot Enable VoLTE in the UK

Quick Answer: If the VoLTE toggle is missing or greyed out on your Xiaomi in the UK, first dial *#*#86583#*#* (disables carrier check on some devices), then restart. After restart, go to Settings → SIM cards & mobile networks → [Your carrier] SIM → VoLTE should now appear. If still missing, contact your carrier to check VoLTE is correctly provisioned on your account or SIM profile (EE: 150, O2: 202, Vodafone: 191, Three: 333). Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, including models such as Redmi Note series, POCO X series, POCO F series and Xiaomi flagship devices (Xiaomi 14, Xiaomi 15, etc.). Check If Your Carrier Supports VoLTE EE, O2, Vodafone, Three, Giffgaff, SMARTY and VOXI all support VoLTE on many recent Xiaomi devices. If you're unsure, contact your carrier before continuing. Before Anything Else Check whether VoLTE is actually w...
Read more

Best Xiaomi Equalizer Settings for Bass

Best Xiaomi Equalizer Settings for More Bass (HyperOS & MIUI) If you want deeper, punchier bass from your Xiaomi, Redmi, or POCO device, the built-in graphic equalizer is the best place to start. This guide shows you how to access it and provides proven bass-boost settings for HyperOS and MIUI. Quick Answer: For deeper bass on Xiaomi devices, go to Settings → Sound & vibration → Sound effects → Graphic equalizer. Use a gentle "smile" curve: boost the lowest frequency bands by 3–6dB, keep mid bands neutral, and slightly boost high bands for clarity. Start with the preset profiles like Rock or Hip hop, then fine-tune manually to avoid distortion. How to Access the Equalizer on Xiaomi Open Settings . Tap Sound & vibration . Scroll down and tap Sound effects . Tap Graphic equalizer . Choose a preset or tap Custom to manually adjust the 10-band equalizer. Note: Depending on your Xiaomi model, the path may vary slightly. H...
Read more

Best Xiaomi Equalizer Settings for Gaming

Best Xiaomi Equalizer Settings for Gaming (HyperOS & MIUI) If you want better audio immersion and clearer positional cues in games on your Xiaomi, Redmi, or POCO device, the built-in graphic equalizer can help. This guide shows you how to access it and provides settings optimised for gaming. Quick Answer: For the best gaming audio on Xiaomi, go to Settings → Sound & vibration → Sound effects → Graphic equalizer. Boost the low frequencies (31Hz–125Hz) slightly for explosion impact, keep mids (500Hz–2kHz) neutral or slightly boosted for dialogue, and boost highs (4kHz–8kHz) for clearer footsteps. Also enable Dolby Atmos if available (select Game, Music, or Dynamic depending on your device), and use Game Turbo for per-game performance controls. How to Access the Equalizer on Xiaomi The equalizer is available natively on most Xiaomi, Redmi, and POCO devices running HyperOS or recent MIUI versions. No third-party apps are required. Open Settings . Tap So...
Read more

How to Exit Fastboot Mode on Xiaomi Phones

How to Exit Fastboot Mode on Xiaomi Phones (Step-by-Step MIUI Guide) Fastboot mode on Xiaomi devices, including Redmi and POCO phones running MIUI, is a useful tool for troubleshooting bugs or flashing custom ROMs. However, accidentally entering Fastboot mode is fairly common, and most users in the UK—whether in London, Manchester, or Birmingham—find themselves stuck and unsure how to exit safely without damaging their device. Why Accidental Fastboot Happens Fastboot mode can be triggered unintentionally if the power and volume buttons are pressed simultaneously during boot-up. While entering intentionally is part of advanced MIUI troubleshooting, unintentional entry usually leads to confusion, especially for less technical users who just want to use their Xiaomi as normal. Basic Method to Exit Fastboot Mode The simplest way to leave Fastboot mode on any Xiaomi, Redmi, or POCO device is straightforward: Press and hold the Power button for 10–15 seconds until the screen ...
Read more

Xiaomi Hotspot Works But Devices Have No Internet

Quick Answer: If your Xiaomi hotspot connects (laptop/tablet shows WiFi bars) but connected devices have no internet, first check Settings → Connection & sharing → Personal hotspot → Data limit → Set to "No limit". Then turn off Battery saver in Settings → Battery → Battery saver → OFF. If still not working, toggle Airplane mode on/off for 30 seconds. Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, including models such as Redmi Note series, POCO X series, POCO F series and Xiaomi flagship devices (Xiaomi 14, Xiaomi 15, etc.). Before Anything Else Open Chrome on your Xiaomi and check whether mobile data works directly on the phone. If mobile data does not work on the Xiaomi itself: Fix the mobile data problem first. Hotspot cannot work without mobile data. If mobile data works on the Xiaomi but connected devices have no internet:...
Read more

Xiaomi Dual SIM Not Working Properly? UK Fix Guide

Quick Answer: If you're having network problems with Dual SIM on your Xiaomi, first check that both SIMs are properly inserted and clean. Then go to Settings → SIM cards & mobile networks → SIM management → ensure your default SIM for data is set correctly. If issues persist, try swapping the SIM cards between slots as a troubleshooting step. Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, covering UK carriers including EE, O2, Vodafone, Three, Giffgaff, SMARTY, and others. 🔍 Quick Start – Find Your Path Symptom Most Likely Cause Go To One SIM has no signal but the other works fine SIM slot or SIM card issue Section 1 Mobile data is slow or drops when both SIMs are active Data SIM setting or network conflict Section 2 Calls drop or fail on one SIM VoLTE or carrier registration is...
Read more

Xiaomi Mobile Data Stops Every Few Minutes

This guide helps if your Xiaomi keeps losing mobile data connection every few minutes, the 4G/5G icon disappears and reappears, or internet stops working briefly and then comes back. Quick Answer: If your mobile data stops every few minutes on Xiaomi, first check that Battery saver is OFF (Settings → Battery → Battery saver). Also check that Data saver is OFF (Settings → SIM cards & mobile networks → [Carrier] SIM → Data saver). In many cases, these power-saving features are the cause. If still happening, go to Settings → Connection & sharing → Reset Wi-Fi, mobile networks, and Bluetooth – this often fixes intermittent data drops. Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, including Redmi Note series, POCO X/F series, and Xiaomi 14/15. 📊 Top Causes Ranking – Where to Start Not all causes are equally likely. Use this ranking to prioritise your trou...
Read more