Xiaomi APN Settings for Telia Sweden

Xiaomi APN Settings for Telia Sweden (2026 Guide)

This guide provides the correct APN (Access Point Name) settings for Xiaomi, Redmi, and POCO devices on Telia Sweden. If your mobile data is not working, this guide will help you configure your device correctly.

Quick Overview

  • Primary Data APN: online.telia.se
  • Username & Password: Leave both blank
  • Primary Data APN Type: default
  • Authentication Type: None / Ingen

If your data is already working, you typically do not need to change these settings.

Quick Navigation

Why APN Settings Matter

APN settings act as a gateway between your Xiaomi device and Telia's mobile network. Without the correct APN, your phone may not be able to access the internet or send MMS messages. While Telia usually sends these settings automatically, manual configuration can be necessary after a software update, SIM swap, or if you are using a non-European ROM device.

Standard Telia Sweden APN Settings

The following settings are the standard APN configuration for Telia Sweden on Xiaomi devices, based on official Telia documentation.

Primary APN Configuration (Mobile Data)

  • Name: Telia online (or any name you prefer)
  • APN: online.telia.se
  • Username: (leave blank)
  • Password: (leave blank)
  • Port: 8080
  • Authentication Type: None / Ingen
  • APN Type: default
  • APN Protocol: IPv4/IPv6
  • MCC: Leave as automatically provided (240)
  • MNC: Leave as automatically provided (01)

Step 1: Access APN Settings on Xiaomi

To configure APN settings on your Xiaomi, Redmi, or POCO device, follow these steps:

  • Open Settings on your phone.
  • Go to SIM cards & mobile networks.
  • Tap your Telia SIM card.
  • Select Access Point Names (APN).

Step 2: Configure or Reset APN

You have two options at this stage:

Option A: Reset to Default

If you see a list of APNs, tap the menu icon (three dots) and select Reset to default. This clears any corrupted settings and restores Telia's automatic configuration.

Option B: Manually Add or Edit APN

If resetting does not work, you can manually add a new APN:

  1. Tap the + (Add) icon.
  2. Enter the settings from the table above.
  3. Tap Save and select the new APN.
  4. Restart your phone.

Important: Only change the APN if resetting to default doesn't work. Leave other fields (MCC, MNC, APN protocol) as provided by your device.

MMS Settings (Optional)

If you are having issues sending or receiving picture messages, you may need to configure a separate MMS APN. Most modern devices handle this automatically, but manual settings are available if needed.

MMS Configuration

  • Name: Telia MMS
  • APN: mms.telia.se
  • MMSC: http://mmss/
  • MMS Proxy: 193.209.134.132:80
  • Authentication Type: PAP
  • APN Type: mms
  • Username: (leave blank)
  • Password: (leave blank)

Troubleshooting & Additional Notes

Telia vs MVNO

If you are using a Telia MVNO (e.g., Fello, Halebop, Telness), these settings may be different.

  • Fello – Uses the same APN as Telia online.telia.se.
  • Telness – Uses APN online.telia.se.

Always check your specific provider's website.

5G and APN

APN settings are generally the same for 4G and 5G. If you are having 5G-specific issues, it is more likely related to network mode settings, regional ROM compatibility, or carrier provisioning.

Important: Separate APNs

For manual configuration, use a separate APN for mobile data (default) and MMS (mms) when required by the carrier configuration.

Frequently Asked Questions

What is the correct APN for Telia Sweden in 2026?

The standard APN is online.telia.se with no username or password. The port is 8080.

Does Telia use a username and password for APN?

No. Telia APN settings typically do not require a username or password. Leave both fields blank.

Why is my mobile data not working after setting APN?

Restart your phone after saving changes. If it still doesn't work, check your plan includes data, or contact Telia to verify your SIM provisioning.

Can APN settings affect 5G?

APN settings generally do not cause 5G connection issues. Problems with 5G are more often related to network mode selection, device region, or carrier provisioning.

Will these settings work on a Redmi or POCO phone?

These APN settings generally apply to Xiaomi, Redmi and POCO devices using a Telia Sweden SIM, although menu names and carrier configurations can vary by device and software version.

What APN does Telia use for MMS?

Telia uses APN mms.telia.se with MMSC http://mmss/ and MMS proxy 193.209.134.132:80.

Note: This guide is updated for 2026. Menu names may vary slightly between HyperOS and MIUI versions. If you are using an MVNO, check your specific provider's APN settings.

Comments

Post a Comment

Popular Guides at UK Xiaomi

Xiaomi USB-C Earphones Not Working Issue Fix

Xiaomi USB-C Earphones Not Working Issue Fix – UK Guide If your USB-C earphones are not being recognized or have no sound when plugged into your Xiaomi, Redmi, or POCO device, this guide covers the most common reasons and how to fix them. Quick Answer: If your USB-C earphones aren't working, first check that the earphones work on another device. Then clean the USB-C port gently with a soft brush to remove dust or debris. Restart your phone and plug the earphones in again. If still not working, check USB audio routing in Developer Options (if available on your device). Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS that use a USB-C port for audio, including devices without a 3.5mm headphone jack. 🔍 Quick Diagnostic Table What you see What it usually means Earphones not detected at all Port debris, ...
Read more

Xiaomi Audio Problems on HyperOS Devices Explained

Xiaomi Audio Problems on HyperOS Devices Explained – UK Guide HyperOS audio problems can affect the phone speaker, wired headphones, USB-C earphones, Bluetooth devices, microphones and car audio systems. Although many issues look similar, they usually have different causes. This guide helps you identify the symptom first, then directs you to the appropriate troubleshooting guide. Quick Answer: Most HyperOS audio issues are caused by incorrect volume settings, Bluetooth routing, Dolby Atmos, Bluetooth codec selection, equalizer settings, microphone permissions or hardware faults. Use the diagnostic table below to identify the correct troubleshooting guide. Start Here – Find Your Problem No sound at all → Go to Speaker & Headphone Audio Problems Bluetooth connected but silent → Go to Bluetooth Connected But No Sound Speaker too quiet → Go to Speaker Volume Low Bluetooth audio sounds poor → Go t...
Read more

Xiaomi Wired Earphones Not Detected on Xiaomi Phones

Xiaomi Wired Earphones Not Detected on Xiaomi Phones – UK Fix If your wired earphones are not being detected when plugged into your Xiaomi, Redmi, or POCO device, this guide covers the most common reasons and how to fix them. Quick Answer: If your wired earphones are not detected, first check they are fully inserted. For 3.5mm models, ensure the plug is firmly seated in the headphone jack. For USB-C models, check compatibility – most modern Xiaomi phones work with digital USB-C earphones with a built-in DAC, but analog models may not be supported. Test the earphones on another device, clean the port gently with a soft brush, and restart your phone. Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, covering both 3.5mm headphone jack and USB-C audio connections. USB Audio Architecture – A Quick Overview Understanding the basics of USB audio can help diagnose ...
Read more

Xiaomi Cannot Enable VoLTE in the UK

Quick Answer: If the VoLTE toggle is missing or greyed out on your Xiaomi in the UK, first dial *#*#86583#*#* (disables carrier check on some devices), then restart. After restart, go to Settings → SIM cards & mobile networks → [Your carrier] SIM → VoLTE should now appear. If still missing, contact your carrier to check VoLTE is correctly provisioned on your account or SIM profile (EE: 150, O2: 202, Vodafone: 191, Three: 333). Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, including models such as Redmi Note series, POCO X series, POCO F series and Xiaomi flagship devices (Xiaomi 14, Xiaomi 15, etc.). Check If Your Carrier Supports VoLTE EE, O2, Vodafone, Three, Giffgaff, SMARTY and VOXI all support VoLTE on many recent Xiaomi devices. If you're unsure, contact your carrier before continuing. Before Anything Else Check whether VoLTE is actually w...
Read more

Best Xiaomi Equalizer Settings for Bass

Best Xiaomi Equalizer Settings for More Bass (HyperOS & MIUI) If you want deeper, punchier bass from your Xiaomi, Redmi, or POCO device, the built-in graphic equalizer is the best place to start. This guide shows you how to access it and provides proven bass-boost settings for HyperOS and MIUI. Quick Answer: For deeper bass on Xiaomi devices, go to Settings → Sound & vibration → Sound effects → Graphic equalizer. Use a gentle "smile" curve: boost the lowest frequency bands by 3–6dB, keep mid bands neutral, and slightly boost high bands for clarity. Start with the preset profiles like Rock or Hip hop, then fine-tune manually to avoid distortion. How to Access the Equalizer on Xiaomi Open Settings . Tap Sound & vibration . Scroll down and tap Sound effects . Tap Graphic equalizer . Choose a preset or tap Custom to manually adjust the 10-band equalizer. Note: Depending on your Xiaomi model, the path may vary slightly. H...
Read more

Best Xiaomi Equalizer Settings for Gaming

Best Xiaomi Equalizer Settings for Gaming (HyperOS & MIUI) If you want better audio immersion and clearer positional cues in games on your Xiaomi, Redmi, or POCO device, the built-in graphic equalizer can help. This guide shows you how to access it and provides settings optimised for gaming. Quick Answer: For the best gaming audio on Xiaomi, go to Settings → Sound & vibration → Sound effects → Graphic equalizer. Boost the low frequencies (31Hz–125Hz) slightly for explosion impact, keep mids (500Hz–2kHz) neutral or slightly boosted for dialogue, and boost highs (4kHz–8kHz) for clearer footsteps. Also enable Dolby Atmos if available (select Game, Music, or Dynamic depending on your device), and use Game Turbo for per-game performance controls. How to Access the Equalizer on Xiaomi The equalizer is available natively on most Xiaomi, Redmi, and POCO devices running HyperOS or recent MIUI versions. No third-party apps are required. Open Settings . Tap So...
Read more

How to Exit Fastboot Mode on Xiaomi Phones

How to Exit Fastboot Mode on Xiaomi Phones (Step-by-Step MIUI Guide) Fastboot mode on Xiaomi devices, including Redmi and POCO phones running MIUI, is a useful tool for troubleshooting bugs or flashing custom ROMs. However, accidentally entering Fastboot mode is fairly common, and most users in the UK—whether in London, Manchester, or Birmingham—find themselves stuck and unsure how to exit safely without damaging their device. Why Accidental Fastboot Happens Fastboot mode can be triggered unintentionally if the power and volume buttons are pressed simultaneously during boot-up. While entering intentionally is part of advanced MIUI troubleshooting, unintentional entry usually leads to confusion, especially for less technical users who just want to use their Xiaomi as normal. Basic Method to Exit Fastboot Mode The simplest way to leave Fastboot mode on any Xiaomi, Redmi, or POCO device is straightforward: Press and hold the Power button for 10–15 seconds until the screen ...
Read more

Xiaomi Hotspot Works But Devices Have No Internet

Quick Answer: If your Xiaomi hotspot connects (laptop/tablet shows WiFi bars) but connected devices have no internet, first check Settings → Connection & sharing → Personal hotspot → Data limit → Set to "No limit". Then turn off Battery saver in Settings → Battery → Battery saver → OFF. If still not working, toggle Airplane mode on/off for 30 seconds. Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, including models such as Redmi Note series, POCO X series, POCO F series and Xiaomi flagship devices (Xiaomi 14, Xiaomi 15, etc.). Before Anything Else Open Chrome on your Xiaomi and check whether mobile data works directly on the phone. If mobile data does not work on the Xiaomi itself: Fix the mobile data problem first. Hotspot cannot work without mobile data. If mobile data works on the Xiaomi but connected devices have no internet:...
Read more

Xiaomi Dual SIM Not Working Properly? UK Fix Guide

Quick Answer: If you're having network problems with Dual SIM on your Xiaomi, first check that both SIMs are properly inserted and clean. Then go to Settings → SIM cards & mobile networks → SIM management → ensure your default SIM for data is set correctly. If issues persist, try swapping the SIM cards between slots as a troubleshooting step. Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, covering UK carriers including EE, O2, Vodafone, Three, Giffgaff, SMARTY, and others. 🔍 Quick Start – Find Your Path Symptom Most Likely Cause Go To One SIM has no signal but the other works fine SIM slot or SIM card issue Section 1 Mobile data is slow or drops when both SIMs are active Data SIM setting or network conflict Section 2 Calls drop or fail on one SIM VoLTE or carrier registration is...
Read more

Xiaomi Mobile Data Stops Every Few Minutes

This guide helps if your Xiaomi keeps losing mobile data connection every few minutes, the 4G/5G icon disappears and reappears, or internet stops working briefly and then comes back. Quick Answer: If your mobile data stops every few minutes on Xiaomi, first check that Battery saver is OFF (Settings → Battery → Battery saver). Also check that Data saver is OFF (Settings → SIM cards & mobile networks → [Carrier] SIM → Data saver). In many cases, these power-saving features are the cause. If still happening, go to Settings → Connection & sharing → Reset Wi-Fi, mobile networks, and Bluetooth – this often fixes intermittent data drops. Applies to Redmi, POCO and Xiaomi Phones This guide applies to Xiaomi, Redmi and POCO devices running MIUI or HyperOS, including Redmi Note series, POCO X/F series, and Xiaomi 14/15. 📊 Top Causes Ranking – Where to Start Not all causes are equally likely. Use this ranking to prioritise your trou...
Read more