Xiaomi Cannot Register on Tele2 Sweden

Xiaomi Not Registered on Tele2 Sweden? 2026 Fix for Redmi & POCO Phones

If your Xiaomi, Redmi, or POCO phone shows "Not Registered on Network", only allows emergency calls, or fails to connect to Tele2 Sweden entirely, this guide covers common troubleshooting steps. This issue can occur across Sweden, from Stockholm and Gothenburg to Malmö, Helsingborg, and Uppsala, and may affect both 4G and 5G connections.

Diagnose the Issue First

Before making changes, determine the pattern of your network registration issue:

• Does the phone show "Not Registered on Network"? – This error means your phone cannot complete the registration process with Tele2's network.
• Can you make emergency calls only? – If only emergency calls work, your phone is not properly registered with Tele2's network.
• Location-specific? – Does the issue occur everywhere or only in specific areas? Tele2's coverage is typically excellent in Stockholm, Gothenburg, and Malmö, but may vary in other areas.
• Did it work before? – Did this issue start after a system update, SIM swap, or traveling abroad?

Why This Happens

• Network operator selection issue – If your phone is set to manual network selection and cannot find Tele2, it may fail to register.
• SIM or account issues – Your SIM card may be faulty, not properly provisioned, or your account may have an issue. Prepaid SIMs must be registered with the operator to work fully.
• Device compatibility – Imported Xiaomi variants, especially models designed for other regions, may have missing bands or VoLTE compatibility issues with Tele2 Sweden.
• Network mode mismatch – If your phone is locked to a specific network mode in an area without coverage, it may fail to register.

Check Network Status (Tele2 Sweden)

Before troubleshooting your device, verify Tele2's network status:

• Check Tele2's Driftinformation page for planned maintenance or outages in your area.
• Tele2 coverage maps show network availability across Sweden. Coverage is typically strongest in city centres like Stockholm, Gothenburg, and Malmö.
• If there is a confirmed outage, network registration may be restored automatically within a few hours.

Step 1: Test SIM in Another Phone

Why this matters: This is the quickest way to determine if the issue is your Xiaomi device or your SIM/account.

• Insert your Tele2 SIM into another phone (preferably a recent model).
• Check if the phone registers on the network and can make calls.
• If the SIM works normally on the other phone, the issue is likely with your Xiaomi device – continue with the steps below.
• If the SIM also fails on the other phone, the problem is likely with your SIM or account – contact Tele2.

If the SIM works normally in another phone, continue with Step 2.

Step 2: Check Network Operator Selection

Why this matters: If manual network selection is configured incorrectly, the phone may fail to register on the selected network.

• Settings → SIM cards & mobile networks
• Tap your Tele2 SIM
• Tap Network operators
• Select Choose automatically (if currently set to manual)
• Wait for the phone to register on Tele2's network
• Check if the "Not Registered on Network" error disappears

If the phone still cannot register, move to Step 3.

Step 3: Check Network Mode

Why this matters: If your phone is locked to a specific network mode (e.g., 5G only) in an area without coverage, it may fail to register.

• Settings → SIM cards & mobile networks
• Tap your Tele2 SIM
• Tap Preferred network type
• Select an automatic option that includes LTE/4G, such as 5G/LTE/3G/2G Auto or 4G/LTE preferred
• Wait 30 seconds and check if the phone registers

Note: If the phone registers on 4G but not 5G, the issue is likely 5G-specific. You can continue using 4G while troubleshooting 5G separately.

If registration still fails, move to Step 4.

Step 4: Check Device Compatibility

Why this matters: Not all Xiaomi devices support all of Tele2 Sweden's frequency bands. This is particularly important for imported variants designed for other regions.

Check your device model:

• European/Global variants – Generally support Tele2's bands, including B3 (1800 MHz), B7 (2600 MHz), and B20 (800 MHz).
• Imported variants (China, India, or other regions) – May lack key LTE bands or VoLTE profiles required by Tele2.
• Band 20 (800 MHz) is used by Tele2 for better coverage – If your device lacks B20, you may experience limited coverage in rural areas.

Important distinction:

• No registration anywhere – This is more likely a SIM, account, or configuration issue, not a band compatibility issue.
• Poor or limited coverage in some locations – This is more likely a band or coverage issue.
• Missing LTE bands usually causes weak signal, slow speeds, or poor indoor coverage – not a complete failure to register on the network.

If your device is a European/Global variant and registration still fails, move to Step 5.

Step 5: Reset Network Settings

Why this matters: This resets Wi-Fi, mobile data, and Bluetooth settings without deleting personal data. It clears corrupted network configurations that may be preventing registration.

1. Settings → Connection & sharing (HyperOS) or Settings → Additional settings → Backup & reset (MIUI)
2. Select Reset Wi-Fi, mobile & Bluetooth or Reset network settings
3. Confirm the reset
4. Restart your phone
5. Give the phone a few minutes to reconnect to the network
6. Check if the phone registers on Tele2

If registration still fails, move to Step 6.

Step 6: Check for System Updates

Why this matters: Software updates often include modem firmware improvements that can resolve network registration issues.

1. Settings → About phone → Check for updates
2. Install any available updates
3. Restart your phone and check if network registration works

If you're already on the latest version and registration still fails, move to Step 7.

Step 7: Check IMS & VoLTE (If You Have Signal but Calls Fail)

Why this matters: IMS (IP Multimedia Subsystem) registration is required for VoLTE and some network services on Tele2. This step is relevant if you can see signal bars but calls fail or drop to 3G/2G. It does not normally prevent initial network registration.

1. Open the Phone app
2. Dial *#*#4636#*#*
3. Select Phone information
4. Tap the three dots in the top right corner
5. Select IMS Service Status
6. Check if Voice over LTE shows as Available or Registered

If IMS shows "Not Registered":

• Try toggling Airplane Mode on and off to re-register
• Check if VoLTE is enabled in Settings → SIM cards & mobile networks
• If IMS registration fails, this may indicate a provisioning issue on Tele2's side

If registration still fails or you don't have signal, move to Step 8.

Step 8: Check APN (Only if Data Fails After Registration)

Why this matters: APN settings affect mobile data connectivity after the phone has registered on the network. They normally do not determine whether the phone can register on Tele2's radio network. Only attempt this step if your phone can make calls but cannot access mobile data.

Standard Tele2 Sweden APN settings:

• APN: internet.tele2.se (or 4g.tele2.se for LTE)
• Username: (leave blank)
• Password: (leave blank)
• MMSC: http://mmsc.tele2.se
• MMS Proxy: 130.244.202.30
• MMS Port: 8080
• APN Type: default,supl,mms
• MCC: 240
• MNC: 07

Note: Some users have reported success using the APN 4g.tele2.se for LTE connections.

1. Settings → SIM cards & mobile networks → Access Point Names
2. Tap the menu icon (three dots) and select Reset to default
3. If that doesn't work, manually create a new APN with the settings above
4. Restart your phone and test data connectivity

If registration still fails or data is still not working, contact Tele2 or Xiaomi support.

Contact Carrier (When Required)

Contact Tele2 Sweden if:

• Your SIM fails to register on other phones as well (SIM or account issue)
• You've tried all steps above and registration still fails
• You need a new SIM card
• You need to check your account status – prepaid SIMs must be registered to work fully

Contact Xiaomi EU Support if:

• You've tried all steps above and registration still fails
• You've tested your SIM in another phone and it works normally
• Your device is a European/Global variant but network registration fails
• You suspect a hardware fault with the cellular antenna or modem

Final Verdict

If your Xiaomi cannot register on Tele2 Sweden, start by testing your SIM in another phone – this is the quickest way to determine if the issue is your device or your SIM/account. If the SIM works elsewhere, check that your phone is set to automatic network selection and that the network mode is set to an automatic option like 5G/LTE/3G/2G Auto. Consider whether your device is an imported variant that may lack Tele2's frequency bands – but note that band compatibility primarily affects coverage quality, not complete registration failure. If you have signal but calls fail, check IMS registration status using *#*#4636#*#* to see if the phone is properly registered for VoLTE services. If the issue persists, reset network settings or check for system updates. APN configuration is relevant only after the phone has registered on the network – it does not cause registration failure. Contact Tele2 to verify your account and SIM provisioning if none of these steps resolve the problem.

Frequently Asked Questions